IGNA Online

Learn how to configure centralized AAA on Cisco IOS-XE using TACACS+ and Cisco ISE 3.3.

Everything you need to know before buying a roof top tent: soft shell vs. hard shell, roof load ratings, top brands for 2026, installation tips, and real-world advice from the trail.

A head-to-head benchmark comparison of the NVIDIA RTX 5060 Ti and AMD RX 9060 XT mid-range GPUs in 2026 — rasterization, upscaling (DLSS 4 vs FSR 4), ray tracing, and a clear verdict on which card to buy.

A practical engineer’s guide to deploying IPv6 on Cisco IOS-XE: configure global unicast addressing, OSPFv3 routing, dual-stack interfaces, DHCPv6, named ACLs, and NDP — with real CLI output at every step.

I wired up Claude AI routines to act as an autonomous homelab assistant — diagnosing container crashes, monitoring disk usage, checking config drift, and sending plain-English summaries every morning. Here’s the full setup with real Python code.

A Jeep on a trail without a winch is a Jeep that depends on someone else to get it home. This guide covers winch capacity rules, synthetic vs. steel rope, top brands, mounting requirements, and the exact step-by-step process for a safe self-recovery.

A complete guide to DMVPN Phase 2 on Cisco IOS-XE: configure mGRE tunnels, IKEv2 IPsec, NHRP registration, OSPF next-hop preservation, and troubleshoot the most common failure modes including NAT traversal and dual-hub redundancy.

A complete, command-by-command walkthrough for upgrading Cisco Catalyst 9300/9400/9500 switches: bundle mode vs. install mode, the install add/activate/commit workflow, ISSU eligibility, common failure scenarios including rommon recovery, post-upgrade verification, and rollback procedures — all with real IOS-XE output.

Build a full homelab monitoring stack with Prometheus, Grafana, Node Exporter, and cAdvisor — all running in Docker. Real-time dashboards, alerting, and multi-host support with a single docker compose up.