Master Wireshark for Cisco network troubleshooting. Covers BPF capture filters vs. display filters, Embedded Packet Capture (EPC) on IOS-XE, SPAN configuration, and real-world scenarios for BGP, OSPF, STP, and security anomaly analysis with actual IOS-XE CLI commands.
A step-by-step guide to configuring MPLS L3VPN on Cisco IOS-XE — covering LDP setup, VRF definitions, MP-BGP VPNv4, CE-PE routing, and verification with real show command output.
BGP communities let you carry policy intent alongside your routes — tag once, match everywhere. This guide covers community configuration, route filtering with prefix-lists and AS-path filters, remotely triggered blackholing (RTBH), large communities, and production best practices with real IOS-XE CLI examples.
DMVPN Phase 2 enables direct spoke-to-spoke tunnels on demand, bypassing the hub after the initial NHRP resolution. This complete IOS-XE guide covers mGRE tunnel setup, NHRP configuration, EIGRP next-hop-self pitfalls, IPsec with IKEv2, verification commands, and the most common deployment gotchas.
Most network engineers harden the data plane and forget the control plane — until an SNMP flood drops their OSPF adjacencies. This guide walks through a production-ready CoPP policy for Cisco IOS-XE, with real CLI templates, tuning guidance, and the show commands you need to verify it’s working.
