A complete guide to choosing and installing LED light bars, pod lights, and rock lights on your Jeep. Covers beam patterns, mounting positions, wiring best practices, switch panels, and legal considerations for 2026.
A complete guide to deploying SNMPv3 on Cisco IOS-XE — covering view and group configuration, per-user auth/priv credentials, ACL hardening, LibreNMS device onboarding, and building Grafana dashboards with Telegraf and InfluxDB.
Deploy the full Prometheus + Grafana + Node Exporter stack with Docker Compose, write custom PromQL queries, set up proactive alerting, and get real-time visibility into every host and container in your homelab.
A complete deployment guide for Cisco AAA using TACACS+ and Identity Services Engine on IOS-XE — covering server config, command authorization, accounting, SSH hardening, and troubleshooting with real CLI output.
A complete hands-on guide to deploying IPv6 on Cisco IOS-XE: enabling dual-stack interfaces, configuring SLAAC and stateful DHCPv6, setting up OSPFv3 with address-family support, and implementing DHCPv6 prefix delegation — with real CLI syntax and verified show command output.
A complete guide to DMVPN Phase 2 on Cisco IOS-XE: configure mGRE tunnels, NHRP registration, EIGRP with split-horizon disabled, and IPsec encryption. Includes troubleshooting commands and a final verification checklist.
A tour of OneHub, my 23-container self-hosted server, and Mia Tracker — the custom app that lets AI analyze my daughter’s data without a single byte leaving my hardware. Should I open-source it?
Learn how to set up Traefik v3 as a reverse proxy for your homelab Docker stack. Covers automatic HTTPS with Let’s Encrypt, Docker service discovery via labels, reusable middleware, wildcard certs via DNS challenge, and common troubleshooting steps.
A practical deep dive into STP and RSTP on Cisco IOS-XE — root bridge election, port roles, PortFast, BPDU Guard, Root Guard, Loop Guard, and step-by-step troubleshooting with real CLI show command output.
Build a probe-verified dual-ISP failover system on Cisco IOS-XE using IP SLA and Object Tracking. When your primary ISP loses internet connectivity — even if the physical link stays up — automated failover kicks in within seconds without any manual intervention.
Learn how to build and verify an MPLS L3VPN on Cisco IOS-XE from scratch — covering VRF configuration, LDP, MP-BGP VPNv4, PE-CE eBGP routing, and systematic troubleshooting with real CLI output.
A technical deep dive into zero-knowledge proofs — what SNARKs and STARKs are, how they differ, and why they’re now the backbone of blockchain scaling, privacy, and DeFi compliance in 2026.
